
Carl's Place
Curved Enclosure Kit (9x14x8)
Buy from
Prices confirmed Nov 10, 2026 · we check every retailer daily
When you buy through links on Northcourse, we may earn a commission at no additional cost to you. Read the full affiliate disclosure
Price watch
Not buying today? We'll email you once when the Curved Enclosure Kit (9x14x8) drops below its 30-day typical price at a retailer we track. No newsletter, unsubscribe in one click.
Carl's Place's DIY curved enclosure: steel 2-inch fittings, a curved Premium impact screen (or High-Contrast Gray), BlackStop fabric, foam and bungees. You supply the 2-inch EMT pipe or buy Carl's Pipe Framing Kit. We link the smallest listing, 9 ft high, 14 ft wide and 8 ft deep (108 × 166 × 96 in) with the Premium screen at $4,894.95. Eighteen sizes run to 10 × 17 × 15 ft; the back cover and safety baffles are extra. The curve is the point and the catch. It wraps the picture around the golfer, and it needs image warping (Indoor Golf Outlet names Immersive Display PRO) to look right from one projector, which flat enclosures do not. Carl's asks for 6 to 7 inches above the frame, 2 to 3 inches each side, and 9.5 inches behind for the rear fitting. The 8 ft depth is the enclosure, not the room; you still need room behind the tee.
Sold as one
Packages with the Carl's Place Curved Enclosure Kit (9x14x8)
Retailers sell the Carl's Place Curved Enclosure Kit (9x14x8) with a launch monitor and the rest of a setup, at one price. The three we’d look at first, one per launch monitor, and why; each price is the configuration shown, in stock.
When you buy through links on Northcourse, we may earn a commission at no additional cost to you. Read the full affiliate disclosure
Indoor Golf Outlet · Enclosure and projector · Carl's Place Curved
VTrack Launch Monitor
VTrack Launch Monitor, Carl's Place Curved Enclosure Kit (9x14x8), BenQ AK700ST
Every part is one we list, and it costs $425 less than the same parts bought separately.
Indoor Golf Outlet · Enclosure and projector · Carl's Place Curved
AccuGolf Hawkeye
AccuGolf Hawkeye, Carl's Place Curved Enclosure Kit (9x14x8), BenQ AK700ST
Every part is one we list, and it costs $88 less than the same parts bought separately.
Indoor Golf Outlet · Enclosure and projector · Carl's Place Curved
Uneekor EYE XO
Uneekor EYE XO, Carl's Place Curved Enclosure Kit (9x14x8), BenQ AK700ST
Every part is one we list, and it costs $84 less than the same parts bought separately.
Compare with
How it stacks up against the closest alternatives.
Who this is for
Honest match per persona.
Good for
- Performance Seeker
Carl's Premium screen and enclosure sides that run the full 8 to 15 ft depth, so mishits stay in the bay during long sessions.
- Showroom
A curved 14-ft screen is the one enclosure here that changes how the room looks, not just what it contains. Budget for warping software and a careful projector setup.
Not for
- Cost-Effective Buyer
$4,894.95 before pipe, baffles or software, close to three of Carl's flat 9×12 kits.
- Space-Constrained
The smallest size is 14 ft wide and 9 ft tall before buffers, and 8 ft of enclosure depth.
Specifications
The numbers, plainly stated.
Hardware
| Type | DIY curved enclosure kit (fittings, screen, BlackStop fabric); 2" EMT sourced separately |
| Screen | Curved Premium (white) or High-Contrast Gray impact screen |
Dimensions
| Size We Link | 9' H × 14' W × 8' D: 108" × 166" × 96", plus 9.5" for the backset rear fitting ($4,894.95, Premium screen) |
| Other Sizes | 18 listings from 9 × 14 × 8 ft up to 10 × 17 × 15 ft (H × W × D) |
Requirements
| Image Warping | Needed for one projector on the curve (e.g. Immersive Display PRO, not included) |
| Clearance | 6–7" above, 2–3" each side, 9.5" minimum behind for the rear fitting (Indoor Golf Outlet) |
| Not Included | 2" EMT pipe, back cover and its pipe kit, safety baffles, warping software |
Same category, different tradeoff



